Pulsar Axion XQ38 LRF Thermal imager with integrated laser rangefinder

£2,121.95

Description

The Pulsar Axion LRF XQ38 Thermal imager features a 384 x 288   thermal sensor, sub 40MK NETD sensor, twinned to an HS amoled display to deliver up to 1350M detection range with a  1000m laser rangefinder for accurate target identification and range finding in the field with 3.5 x to 14x magnification.

The Axion XQ38 LRF features a 384×288 17µm <40mK NETD thermal sensor. The NETD (Noise Equivalent of Temperature Differential), expressed in millikelvins (mK) is one of the most important parameters for thermal sensors as it describes their sensitivity. The lower the NETD value, the higher the sensitivity.

The new <40mK sensor, exclusively manufactured by ULIS for Pulsar puts Pulsar devices at the forefront of the market with the devices all featuring a better image in conditions where there is a low-temperature difference such as during rainfall, fog or cold mornings. These environmental conditions are the most difficult for thermal imagers and this new sensor will provide a clearer image for users.

The Axion LRF XQ38 is perfectly suited to outdoor conditions, with a robust magnesium bodyshell, an IPX7 protection rating (fully waterproof), 1024×768 AMOLED HD micro-display and can perform in both hot & freezing temperatures.

The Axion LRF XQ38 benefits from all the features of the standard Axion XQ38 but with a built-in eyesafe 1000m Laser Rangefinder to help users accurately measure the distance of targets. With an accuracy of ±1m at 1000m, the laser rangefinder can take a single measurement or scan a moving target. Additionally, the unit has up to eight colour palettes to help enhance observation in varying conditions.

Picture-in-Picture (PiP) mode, upon activation, displays a second image with magnification in the top part of the Axion’s display screen. This small image helps to zoom in on a target while retaining the rest of the field of view, maximising situational awareness.

The APS5 Battery Pack system offers an ultra-lightweight, quick-change power option that provides hours of operating time. APS Battery Packs can be charged by USB through its intended unit or an APS Battery Charger. (Please note that the Axion XQ38 & LRF XQ38 utilise a different battery & charger to the rest of the Axion Series).

  • Small pocket-sized format
  • Long detection range
  • High magnification
  • Smooth digital zoom
  • HD Frost-Resistant display
  • Focusable lens
  • Dioptre control
  • 8 Colour modes
  • Instant Start-Up & “Display Off” mode
  • PiP mode
  • Audio capable
  • 16GB Internal memory
  • User friendly controls
  • Built-In laser rangefinder (Axion LRF XQ38)
  • IPX7
  • Wide operating temperature
  • Multiple observation modes
  • Three calibration modes (Manual, semi-auto, auto)
  • Pixel correction
  • Quick-Change, rechargeable APS5 battery pack
  • MicroUSB port
  • Lightweight
  • Magnesium
  • Image Boost Technology

 

 

 

Additional information

Manufacturer

Magnification

3.5x – 14x

Reviews

There are no reviews yet.

Be the first to review “Pulsar Axion XQ38 LRF Thermal imager with integrated laser rangefinder”

Your email address will not be published. Required fields are marked *