The Infiray Eye II Series V2.0 E3 Max thermal imaging scope is light and easy to carry, especially suitable for one handed operation that is easy and quick to deploy making it perfect for deer stalking, vermin control and wildlife surveillance, with the ergonomic design making it the perfect choice for 24/7 use outdoors day or night.

17 Micron Thermal Imaging Sensor

High performance 17 μm pixel pitch detectors are embedded. Powerful 35mm objective lens in combination with a 17 µm professional grade thermal imaging sensor provides exceptional detection capabilities. A standard 1,7 m (5.58 ft) tall object can be detected at a 1818 m (1990 yds) distance in complete darkness.

High Image Frequency 50 Hz and HD Micro Display

The 50 Hz refresh rate guarantees that you will capture every moment that you are interested in.
1280×960 high-resolution internal LCOS display offers a sharp image and vivid colours.

Integrated Video Recording and Wifi

The Eye II Series V2.0 E3 Max thermal features integrated video recording and wifi for capturing videos through the thermal imager, allowing you to share footage, stream to a mobile device and updating firmware.

Multiple Colour Palettes

The Eye II series provides more than 5 colour palettes for true colourized temperature mapping, including “white hot” “Black Hot” “Red Hot”  “Colour” and “Hot Target Highlight”. The Eye II makes it fast easy to switch between different colour palettes.

Stadiametric Rangefinder

Based on estimated heights of targets users can get an estimated distance from the target with the built in stadiametric Rangefinder fast and easy.

Features:

• Resolution: 384×288 17 micron thermal sensor
• Display: 1280×960 LCOS
• Sensitivity: Sub 40mk NETD
• Optical Magnification: 3.5x – 14x
• Battery Life: up to 7hrs
• Detection Range: Up to 1818m (man sized object)
• Weight – 420 grams
• Refresh- 50hz smooth refresh

The Infiray Eye II Series V3.0 E6 Plus thermal imaging scope is light and easy to carry, especially suitable for one handed operation that is easy and quick to deploy making it perfect for deer stalking, vermin control and wildlife surveillance, with the ergonomic design making it the perfect choice for 24/7 use outdoors day or night.

High Image Quality

The advanced image processing ability of the Infiray detector, which has high performance electronics and optimised infrared optics, creates excellent image clarity and provides better detection and identification both day and night.

12 Micron Thermal Imaging Sensor

High performance 12 μm pixel pitch detectors are embedded. Powerful 35mm objective lens in combination with a 12 µm professional grade thermal imaging sensor provides exceptional detection capabilities. A standard 1,7 m (5.58 ft) tall object can be detected at a 1818 m (1990 yds) distance in complete darkness.

High Image Frequency 50 Hz and HD Micro Display

The 50 Hz refresh rate guarantees that you will capture every moment that you are interested in.
1080×768 high-resolution internal OLED display offers a sharp image and vivid colours.

Integrated Video Recording and Wifi

The Eye II Series V3.0 E6 Plus thermal features integrated video recording and wifi for capturing videos through the thermal imager, allowing you to share footage, stream to a mobile device and updating firmware.

Multiple Colour Palettes

The Eye II series provides more than 5 colour palettes for true colourized temperature mapping, including “white hot” “Black Hot” “Red Hot”  “Colour” and “Hot Target Highlight”. The Eye II makes it fast easy to switch between different colour palettes.

Stadiametric Rangefinder

Based on estimated heights of targets users can get an estimated distance from the target with the built in stadiametric Rangefinder fast and easy.

Features:

• Resolution: 640 x 512 12 micron thermal sensor
• Sensitivity: Sub 25mk NETD
• Display: 1024 x 768 OLED
• Optical Magnification: 2.1x – 8.4 x
• Battery Life: up to 6hrs
• Detection Range: Up to 1818m (man sized object)
• Weight – 420grams
• Refresh- 50hz smooth refresh

The Infiray EYE 2 E6 Pro thermal imager is a pocket sized thermal monocular which is perfect for exploring the outdoors at night and in low light conditions, revealling your surroundings with incredible detail and allowing you to see people, objects and animals with high identification performance.

High Image Quality with up to 2600m man sized detection.

The EyeⅡ series are embedded with IRay independently developed high performance Vox detector which allows you to get high detailed thermal images, it will be much simpler to search targets in darkness. The EyeⅡ series has excellent performance in critical temperature range.

12μm Ceramic Detector

The V3.0 series is equiped with new ceramic encapsulated detector, which are lighter, lower power consumption and last longer.

HD Micro Display  

1280×768 OLED high resolution display that offers crisp image and vivid colors.

Long Detection Range

Depending on model, the V3.0 series is capable of detecting an average human-size target, dressed in outerwear, at a range up to 2600m in complete darkness.

Standby Function

When it is necessary to temporarily stop observation the user can apply standby function. It provides the necessary level of camouflage (no light from the eyepiece of the device) between observation sessions as well as the fast restart of observation (when display is turned off, all other systems are working; for normal operation it is enough just to power on the display again).

High Image Frequency

And the 50Hz refresh rate guarantees you to capture every moment that you are interested.

PIP Functions

Picture-in-Picture improves accuracy by providing a 2x magnified image of the reticle area at the top of the display. It helps to zoom in on a target while retaining the rest of the field of view visible.

5 Color Palettes

The Eye II series provides more than 5 color palettes for true colorized temperature mapping, including “white hot” “black hot” “red hot” “color” and “hot target highlight”. Switching between different color palettes is fast and easy.

Stadiametric Rangefinder

Based on estimated heights of targets user can get the rough distance from the target with the build-in stadiametric rangefinder fast and easy.

Built-in Video Recorder and WiFi Connection

The monocular has 16 GB build-in memory to store the captured still images and video recording and WiFi module which allows 4 connections simultaneously.

Features:

• Resolution: 640×512 12 micron thermal sensor
• Display: 1280×768 OLED
• Sensor: Sub 25mk NETD sensitivity
• Lens: 50mm Pro Thermal Lens
• Optical Magnification: 3x – 12 x
• Battery Life: 6hrs
• Detection Range: Up to 2597m
• Weight – 500grams
• Refresh- 50hz smooth refresh

The Sightmark Wraith 4K offers a higher resolution image than the very popular Wraith HD, providing a great identification range day or night, with the ability to use more of the 3-24x magnification range, with less pixelation offering a detection range of up to 300yards.

Outputting to a 1280×720 HD display the Wraith 4K  features a Internal Lithium Ion rechargeable battery pack which provides up to 8hrs run time. Run time can be extended with the use of a USB external power pack for those days in the field when you are out from sunrise to sunset.

With 10 reticle options, and 9 colours, video recording with Sound and a Wifi app for connectivity to your smartphone.

Wraith 4k comes complete with a high power IR illuminator and standard short AR Picatinny mount.

Features:

• 4K 4000 x 3000 sensor,
• 3-24x magnification, with USER SELECTABLE zoom increments from 0.1x, 0.2x, 0.5x and 1x, So you can go from 1x to 8x zoom in 8 clicks or in 80 clicks.
• New 4K video with sound
• 1280 x 720 HD display
• 8hr lithium battery pack (5hrs with video)
• External battery pack option available separately
• Night Vision detection range up to 300yd
• New High power 850nm LED IR illumination.

The Pulsar Accolade 2 PRO LRF XP50 thermal binoculars provide an enhanced viewing experience when spotting wildlife at night whether thermal foxing, or deer stalking by day with the added benefit of a high performance thermal laser rangefinder for accurate range finding up to 1000m.

Fitted with a 640 x 480 17µm <25mK NETD thermal sensor and a 50mm (F/1.2) fast lens, the Accolade 2 PRO LRF XP50 is capable of detailed imaging even in environments with low temperature differences, and with its 640×480 AMOLED frost-resistant display and a 50Hz frame rate it provides super smooth & clear observation.

The dual eyepiece on Pulsar Accolade 2 PRO LRF reduces eye fatigue during longer viewing and enhances the natural look of objects, twinned with a 640×480 thermal core, providing a detection range of up to 1800m, and with advanced features the Pulsar Accolade 2 LRF XP50 Thermal bioculars delivers market leading image quality.

With a 640×480 thermal core, the user can view objects with increased detail and definition, allowing small animals and quarry to be clearly defined against backdrops, providing remarkable identification ranges of quarry.

Dual Eyepiece design

The Dual eyepiece design reduces fatigue during extended periods of operations as well as enhancing the image to provide a clearer more refined image.

The users brain is conditioned to see visual information from both eyes at the same time therefore when using a single eyepiece monocular which is then removed from the eye, the imbalance of light to the brain can often lead to the user becoming disorientated. With Accolade this is dramatically reduced.

Features:

• 640 x 480 Sub 40mK sensor
• 2.5x to 20x magnification
• Up to 1800m detection
• 1000m laser rangefinder
• User-friendly interface
• Three observation modes – City, Forest, Identification
• Three calibration modes – Manual, Semi-automatic, Automatic
• Built-in Wi-Fi module, Stream Vision Compatible, integrated video recording
• Eight colour palettes for enhanced observation
• Variable interpupillary distance
• Smooth and incremental digital zoom
• Built-in 1000m Laser Rangefinder
• Frost resistant AMOLED display
• Wide range of operating temperatures (-25°C to +50°C)
• Dual eyepiece configuration
• Long Detection Range with High Resolution Sensor
• Fully Waterproof IPX7
• Quick-change long-life rechargeable battery packs 

The Pulsar Axion XQ38 hand held thermal features a 384×288 17µm <40mK NETD thermal sensor. The NETD (Noise Equivalent of Temperature Differential), expressed in millikelvins (mK) is one of the most important parameters for thermal sensors as it describes their sensitivity. The lower the NETD value, the higher the sensitivity.

In existing Helion, Trail and Accolade and Axion series models the NETD value was sub 60mK. The new <40mK sensor, exclusively manufactured by ULIS for Pulsar puts Pulsar devices at the forefront of the market with the devices all featuring a better image in conditions where there is a low-temperature difference such as during rainfall, fog or cold mornings. These environmental conditions are the most difficult for thermal imagers and this new sensor will provide a clearer image for users.

The Axion XQ38 is perfectly suited to outdoor conditions, with a robust magnesium bodyshell, an IPX7 protection rating (fully waterproof), 1024×768 AMOLED HD micro-display and can perform in both hot & freezing temperatures.

The Axion XQ38 comes equipped with its own internal stadiametric rangefinder, which helps aid observers in estimating target distances with the height of known objects. Additionally, the unit has up to eight colour palettes to help enhance observation in varying conditions.

Picture-in-Picture (PiP) mode, upon activation, displays a second image with magnification in the top part of the Axion’s display screen. This small image helps to zoom in on a target while retaining the rest of the field of view, maximising situational awareness.

The Axion’s built-in WiFi module means owners will be able to make use of Pulsar’s Free Stream Vision App. Stream Vision allows you to remote control the Axion, set-up the Axion as a motion detector, transfer & share images to your smartphone or tablet and even live stream footage to online web platforms. (Please Note: Stream Vision & WiFi functionality is only available to the non-key model.)

The Axion has an instant start-up and an instant ‘display-off’ mode, which helps to save energy and prolong the operation time of the unit and its dedicated B-Pack Mini Power System. The APS5 Battery Pack system offers an ultra-lightweight, quick-change power option that provides hours of operating time. APS Battery Packs can be charged by USB through its intended unit or an APS Battery Charger. (Please note that the Axion XQ38 & LRF XQ38 utilise a different battery & charger to the rest of the Axion Series)

• Small pocket-sized format
• Long detection range
• High magnification
• Smooth digital zoom
• HD Frost-Resistant display
• Focusable lens
• Dioptre control
• 8 Colour modes
• Instant Start-Up & “Display Off” mode
• PiP mode
• Built-In photo & video recorder
• Stream Vision compatible
• User friendly controls
• Stadiametric rangefinder (Axion XQ38)
• IPX7
• Wide operating temperature
• Multiple observation modes
• Three calibration modes (Manual, semi-auto, auto)
• Pixel correction
• Quick-Change, rechargeable APS5 battery pack
• MicroUSB port
• Lightweight
• Magnesium
• Image Boost Technology

With a magnification of 4.5x to 18x mag whilst still maintaining a wide field of view, the new Pulsar Axion XM30 thermal spotter is designed for wildlife observation, hunting and security with a detection range of up to 1200m via a HD Amoled Microdisplay with 1024 x 768 resolution for crisp sharp imagery at close and long ranges.

Long Detection Range

A powerful objective lens in combination with a 12 µm professional grade thermal imaging sensor provides exceptional detection capabilities. A standard 1,8 m (6 ft) tall object can be detected at a 1200m distance in complete darkness.

High Optic Magnification

Pulsar Axion XM30 offers the highest magnification in the class of compact thermal imagers.

Considerable optic magnification can be increased by means of digital zoom to provide the best identification of observed objects whilst maintaining a wide field of view for spotting and scanning.

Colour Palettes

The 8 Colour palettes enhances viewing varying conditions. While the classic “White Hot” mode is exceptionally versatile. “Hot Black” is often favored for detecting wildlife at night. Red Monochrome helps to reduce or prevent bright backlight from exiting the eyepiece.

Sepia often improves long range observation while “Red Hot”, “Rainbow” and “Ultramarine” enhance temperature difference of various object attibutes. Violet helps to identify objects faster.

Stream Vision Video and Still Photo Recording

The integrated video recorder is a great asset when it comes to capturing footage or taking still images of once in a lifetime experiences. One press of the Record button captures footage than can be captured and shared easily.

With 16GB of internal memory provide many hours of recorded video and tons of photos.

HD AMOLED Microdisplay

High contrast AMOLED micro display of HD resolution offers crisp image and vivid colours. The display ensures excellent image quality and flawless performance even in freezing temperatures.

Picture in Picture Function

Upon activation Picture in Picture function displays a second small image with magnification in the top part of the screen. This small image helps to zoom in on a target whilst retaining the rest of the field of view.

Specification:

• Microbolometer resolution, pixels and pixel pitch: 320 x 240 12 µm
• Display type and resolution: SONY AMOLED 1024 x 768
• Objective Lens: F30 /1.2
• Frame Rate:50hz
• Magnification:4-16x with PIP
• Range of Detection: 1200m
• IPX7 Waterproof rated
• Instant Start Up
• Built In video recording, Wifi and Image Capture
• B Pack Mini Battery Pack System
• Includes APS3 Battery and Charger Base Station, and Carry Case.

The Pulsar Helion 2 XP50 thermal imager incorporates the very latest in hand held thermal imaging technology, with a high resolution 640 x 480 thermal core, providing crisp clear thermal images, with enhanced recognition ranges, and a detection range up to 1.8km. Twinned with the latest wifi and integrated video recording technology the Helion 2 XP50 thermal camera provides unrivalled performance, with a 2.5x to 20x magnification.

Whether you are spotting foxes at night, counting red deer by day, or scanning for poachers on a highland game estate, the new Pulsar Helion XP50 thermal imager will provide the recognition distance previously only obtainable by mil spec thermal imagers costing upwards of 20k pounds.

Using the latest 640×480 17µm thermal core, via 8 user selectable colour palettes, you can now spot, detect and recognize at distances unrivalled by any commercial hand held device on the market.

With a smooth progressive zoom magnification from 2.5x for wide open field scanning, through to 20x for up close and personal details, the Helion XP50 is the ultmate thermal imager.

Integrated rangefinder

Based on estimated heights of observed objects, the stadiametric rangefinding reticle makes determining precise distances fast, easy, reliable and repeatable.

 Wireless remote control

The ergonomic, wireless remote control, with encoder wheel, puts the full range of the Helion’s capabilities at your fingertips for comfortable, convenient, hands-off operation.

Market Leading Image quality

The 17µm sensor and heat sink, located on the device’s body, effectively prevents heat build-up from the sensor and other components while also significantly reducing temperature and noise sensitivity, especially between calibrations.

Stream Vision integrated connection with mobile device.

The Stream Vision software connects the device with Android/iOS mobile unit (smartphone or tablet) which enables you to receive footage in the real time mode, to distantly operate the device with your smartphone, as well to stream online the image captured by the device to Youtube.

New integrated power supply

Helion includes a progressive autonomous B-Pack power supply consisting of a quick-detach, rechargeable IPS7, 5.2A-h battery pack designed to deliver over 8 hrs. of operation on maximum mode. Higher-powered IPS10 battery packs, as well as CR123A and AA battery cases, also are available and provide a perfect off-the-grid power solution.

8 Custom Colour Modes

In addition to user favourite “white hot” and “black hot” imaging, Helion thermal scopes offer a robust array of 8 colour palettes for true colorised temperature mapping. Transitioning from colour to default white hot during operation is fast and easy.

Integrated Video Recording

Capturing still images and video is seamless with the Helionl’s built-in video recorder. Image and video content is stored internally and can easily be transferred to PC/laptop via wired connection or Wi-Fi.

Specification:

• 640 x 480 thermal core
• New 40mK sensor
• 17 micron pxiel pitch
• 2.5-20x Magnification
• 1800m Detection range (Man Sized)
• 50hz Refresh Rate
• 8 selectable colour palettes
• 640 x 480 AMOLED Display
• IPX7 Rated
• Integrated WiFi and recording
• Minimum focus range – 3m
• Field of View – 12.4×9.3
• Weight – 500g
• Dimensions: 234 x 55 x 58 mm

The Proton FXQ30 Thermal Imaging Attachment designed to securely mount to the front of a day optic via Cover Ring Adaptor for fast attachment & unmounting, converting your day scope into a thermal scope.

Features a highly sensitive 384×288 17µm thermal sensor, image boost mode and a frost-resistant 1024 x 768 HD AMOLED display for detailed imaging, capable of detecting up to 900m, optimised for day scopes with 1.5-4.0x magnification.

The Proton FXQ30 is highly robust, featuring a shock-resistance of up to 6000 joules as well as an IPX7 rated magnesium alloy bodyshell for durability.

Powered by a quick-change, rechargeable APS5 battery pack which provides power up to 6 hours.

Has built-in photo & video recording as well as a 16GB internal memory

Features

• Highly sensitive thermal imaging sensor
• Riflescope attachable & handheld use
• Lightweight
• Compact
• Shockproof design
• Magnesium alloy housing
• Quick-Release adaptor with precise screen positioning mechanism
• High recoil rating (.375 H&H, 12-Gauge, 9.3×64)
• Easy transformation into observation scope
• On-Board photo & video recorder
• 16GB internal memory
• “Image Boost” mode
• High contrast, frost-resistant HD AMOLED display
• Multiple colour modes
• Built-In WiFi module
• APS5 battery pack
• IPX7 (Waterproof)
• Point-of-Impact stability
• Wide operating temperature
• Stream Vision compatible